608 Ball Bearing — 8×22×7 mm
Miniature deep groove ball bearing · Miniature 600/620/630 series · SKF priced below, FAG & NTN on request
The 608 is a miniature deep groove ball bearing with a 8 mm bore, 22 mm outside diameter and 7 mm width (8×22×7, Miniature 600/620/630 series). Miniature bearings run in small motors, instruments, printers, hobby and RC models — the 608 is also the standard skateboard and spinner bearing. Shri Narayan Machinery LLP in Sector 9, Noida stocks and sources the 608 in open, shielded (ZZ/2Z), sealed (2RS) executions — 12 SKF variants priced on this page starting at ₹260 + GST list. Bearings bill below list price: WhatsApp +91-9811104037 with your quantity for the actual rate. FAG and NTN equivalents (same ISO 8×22×7 boundary dimensions) are sourced on request. This is a slow-moving size most counters don't hold — we specialise in rare and thin-section sizes, with pickup from Sector 9 and same-day dispatch across Noida, Greater Noida and Delhi NCR on a GST invoice.
SKF 608 — list prices
SKF RSP 2026 Edition 1, effective 30 March 2026. List price is the printed SKF rate, ex-GST — your billing rate is lower. WhatsApp the variant and quantity for the actual rate.
| SKF code | Execution | List price (ex-GST) | |
|---|---|---|---|
| 608-2Z | Metal shields on both sides | ₹260 | Quote |
| 608-2Z/C3 | Metal shields on both sides; C3 clearance (greater than Normal) | ₹260 | Quote |
| 608 | Open — no seals or shields | ₹337 | Quote |
| 608/C3 | C3 clearance (greater than Normal) | ₹337 | Quote |
| 608-Z | Metal shield on one side | ₹370 | Quote |
| 608-Z/C3 D | Metal shield on one side; C3 clearance (greater than Normal); SKF execution D | ₹370 | Quote |
| 608-RSH | Rubber contact seal on one side | ₹404 | Quote |
| 608-2Z/C3WT | Metal shields on both sides; C3 clearance (greater than Normal); wide-temperature grease fill | ₹435 | Quote |
| 608-2RSL/C3 | Low-friction seals on both sides; C3 clearance (greater than Normal) | ₹456 | Quote |
| 608-2RSH | Rubber contact seals on both sides | ₹470 | Quote |
| 608-2RSH/C3 | Rubber contact seals on both sides; C3 clearance (greater than Normal) | ₹470 | Quote |
| 608-2Z/C3GJN | Metal shields on both sides; C3 clearance (greater than Normal); polyurea grease fill (high temperature) | ₹502 | Quote |
Available — pickup today from Sector 9, Noida
Same-day Delhi NCR dispatch · call to confirm stock on your exact model
Buying in quantity? List price is the ceiling, never the bill. Send your full requirement list — we quote item by item, one GST invoice, one delivery across Delhi NCR.
Get wholesale ratePrefer FAG or NTN?
The 608 is an ISO-standard size — FAG and NTN make it to the same 8×22×7 mm boundary dimensions, fully interchangeable with SKF. We source both on request.
What the suffixes mean
- 2Z
- Metal shields on both sides
- 2Z/C3
- Metal shields on both sides; C3 clearance (greater than Normal)
- C3
- C3 clearance (greater than Normal)
- Z
- Metal shield on one side
- Z/C3 D
- Metal shield on one side; C3 clearance (greater than Normal); SKF execution D
- RSH
- Rubber contact seal on one side
- 2Z/C3WT
- Metal shields on both sides; C3 clearance (greater than Normal); wide-temperature grease fill
- 2RSL/C3
- Low-friction seals on both sides; C3 clearance (greater than Normal)
- 2RSH
- Rubber contact seals on both sides
- 2RSH/C3
- Rubber contact seals on both sides; C3 clearance (greater than Normal)
- 2Z/C3GJN
- Metal shields on both sides; C3 clearance (greater than Normal); polyurea grease fill (high temperature)
Shielded: 608ZZ (NTN, NSK, NRB) · 608.2ZR (FAG) · 608-2Z (SKF)
Sealed: 608-2RS · 608LLU (NTN) · 608DDU (NSK) · 608.2RSR (FAG) · 608-2RS1 (SKF)
Same 8 mm shaft, different capacity
Every bearing below fits a 8 mm shaft. A larger outside diameter and width means a heavier series with more load capacity; a thinner section saves space. Ordered light to heavy:
608 bearing — buyer questions
Need the 608 today?
WhatsApp the variant and quantity — we confirm rate and stock the same day. Pickup Sector 9, Noida or same-day NCR dispatch.