DEWALT Products | Dealer in Noida
DEWALT is one of the world's biggest names in industrial power tools, hand tools, and accessories. A Stanley Black & Decker brand, DEWALT has been building professional-grade tools since 1923. The yellow-and-black tools are built for heavy-duty construction, metalworking, and woodworking. The 20V MAX and FLEXVOLT battery systems power a full cordless lineup. Shri Narayan Machinery LLP stocks DEWALT angle grinders, rotary hammers, demolition hammers, chop saws, mitre saws, cordless drills, impact wrenches, and accessories in Noida.
Brand Info
DEWALT Product Catalog
Browse our full range of DEWALT products. Click any series for specs, pricing, and availability.
Metalworking Tools
Angle Grinders
From a 700W 4-inch DWE4010 for everyday deburring to the 2,200W 9-inch DWE4559 with soft start for maximum stock removal, DEWALT angle grinders cover 100mm, 125mm, 180mm, and 230mm disc sizes across 6,500 to 11,000 RPM. Fabricators grab the 1,400W 5-inch DWE4215-IN for weld prep; the DWE8300S-IN adds a no-volt release switch that won't restart on its own after a power cut, which factory safety officers ask for. All models run dust-sealed switches, mesh-protected motors, and spindle locks for quick disc changes, on M10 (4-inch) or M14 spindles. Fabrication shops and site contractors across Noida-NCR buy these with genuine discs from our counter. Stocked at Sector 9, Noida; WhatsApp the model for price.
View Details & Specs
Chop Saws & Cut-Off Machines
A 2,200W motor that doesn't bog mid-cut is what separates the DEWALT DW871 chop saw from cheaper 355mm machines. It slices round stock to 130mm diameter and rectangular sections to 130mm x 120mm at 3,800 RPM, with a quick-lock vise that clamps without a wrench and a fence that mitres to 45 degrees. The DW872 multi-cutter takes TCT blades as well, so aluminium and copper cut clean with minimal burr, and a TCT blade lasts 1,000+ cuts against 50-100 for an abrasive wheel. Both accept standard 355mm x 25.4mm bore wheels available everywhere in India. Fabrication shops and steel yards across Noida-NCR cut pipe, angle, rebar, and threaded rod on these. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Die Grinders & Polishers
Two finishing tools, two ends of the RPM scale: the DEWALT DWE4887N straight die grinder spins carbide burrs and mounted points at 25,000 RPM through 6mm and 1/4-inch collets, slim enough for mold cavities, ports, and weld deburring. The DWP849X rotary polisher runs 600-3,500 RPM variable speed off a 1,250W motor with slow start, so cutting compound stays on the panel instead of the walls; its M14 spindle takes pads up to 180mm for paint correction, stainless buffing, and marble work. Both are all-ball-bearing builds for long service life. Tool rooms, detailing studios, and fabricators across Noida-NCR buy them with burrs, pads, and compounds. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Cordless Power Tools
Cordless Drill Drivers
Battery platform first, then the drill: DEWALT 18V XR and 20V MAX are the same interchangeable batteries, so every drill driver here shares packs with the rest of your kit. The 0.9 kg 12V DCD7100 slips into switchboards and duct spaces; the DCD771 puts out 42 Nm through a 13mm all-metal chuck for framing and fit-out; the brushless DCD778 adds a hammer mode at 65 Nm, and the DCD796 tops the range at 70 Nm. All run 2-speed gearboxes (0-450 / 0-1,500 RPM) with 16-position clutches so you stop stripping screw heads. Electricians, HVAC crews, and maintenance teams across Noida-NCR buy bare tools or kits with 1.5Ah to 5.0Ah batteries. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Cordless Impact Wrenches
Seized truck lug nuts don't argue with 950 Nm: that's the breakaway torque of the DEWALT DCF899 high-torque 1/2-inch impact wrench, on a 20V MAX battery with no compressor and no hose run. Below it, the brushless DCF894 (447 Nm, 3 speeds) covers car wheels and machinery bolting with control, and the 1.5 kg DCF880 (203 Nm) fits engine bays and assembly work. All three hit up to 3,200 impacts per minute with electric brakes for precise torquing, plus hog ring or detent pin anvils for socket retention. Tyre shops, fleet workshops, and structural erectors across Noida-NCR run these daily. Stocked at Sector 9, Noida; WhatsApp the model for price.
View Details & Specs
Cordless Nailers & Screwdrivers
No compressor, no hose, no gas cartridge: the DEWALT DCN692 framing nailer drives 50-90mm nails off a 20V MAX battery, roughly 700 nails per 4.0Ah charge, with sequential and bump-fire modes and tool-free depth adjustment. The DCN890 pins 13-57mm hardened fasteners into concrete up to 40 MPa and structural steel to 6mm, replacing powder-actuated tools with no explosive charge. For boards and assembly, the 4,400 RPM DCF620 drywall screwgun seats screws to a set depth through its adjustable nosecone, and the 1 kg 12V DCF610S2 handles light fastening all day. Dry-fire lockout on the nailers protects your work. Contractors across Noida-NCR buy these with nails and pins. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & SpecsWoodworking Tools
Mitre Saws
The XPS shadow line on the DEWALT DWS780 shows exactly where the blade lands, no laser to calibrate, because the LED casts the blade's own shadow on the workpiece. This 305mm double bevel sliding compound saw crosscuts 345 x 110mm with a 1,675W motor at 3,800 RPM, mitres 60 degrees either way on cam-lock detents, bevels 49 degrees in both directions, and its tall sliding fences hold crown molding up to 178mm. Trim carpenters who need portability pick the lighter 254mm DW715 single bevel instead. Fit a negative-hook TCT blade and both cut aluminium profiles too. Furniture makers and interior contractors across Noida-NCR buy these with blades and stands. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Circular Saws
One pass through 2x lumber: DEWALT 184mm circular saws cut 62.5mm deep at 90 degrees and 47mm at 45, with bevel adjustment to 56 degrees and detents at 22.5 and 45. The corded DWE561A (1,200W, 5,500 RPM) is the workshop and production pick; the cordless 20V MAX DCS565 makes roughly 300+ crosscuts in 2x4 lumber per 5.0Ah charge and keeps cords off roofs and scaffolds; framers who want balance go for the rear-handle DW384. Aluminium shoes keep the cut registered, anti-snag lower guards make plunge cuts smooth, and a dust blower keeps the line visible. Carpenters and shuttering contractors across Noida-NCR buy these with 20mm-bore TCT blades. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & SpecsBuy Genuine DEWALT Products in Noida
As a stocking dealer for DEWALT, Shri Narayan Machinery LLP stocks genuine products with full manufacturer warranty. Visit our shop at C-101, Sector 9, Noida or call +91-9811104037 for availability, pricing, and bulk-order discounts. We serve manufacturing units, factories, and workshops across Noida, Greater Noida, and Delhi NCR.
Need DEWALT Products? Call for Best Dealer Price
Shri Narayan Machinery LLP is your DEWALT dealer in Noida. Call us for availability, best pricing, and bulk-order discounts.