+91-9811104037
Miranda 4 Flute Solid Carbide End Mills: Standard, Long & Extra Long, 1mm to 25mm | Miranda (Dormer Pramet) pneumatic product available at Shri Narayan Machinery LLP Noida
Miranda (Dormer Pramet)

Miranda 4 Flute Solid Carbide End Mills: Standard, Long & Extra Long, 1mm to 25mm

Four edges, double the feed: at the same RPM and chip load, a 4-flute end mill runs twice the table feed of a 2-flute, or the same feed with a finer finish. Miranda's 4-flute solid carbide range covers 1.00mm to 25.00mm in Standard, Long, and Extra Long lengths, so shoulders, deep pockets, and 4xD+ cavities all get a tool without extension holders. The 35° helix and AlTiN coating match the rest of the family, on DIN 6535HA h10 shanks with centre-cutting ends for ramp entry. Working rule: use the shortest length that reaches, and leave full-width slotting to the 2-flutes. Auto component plants and job shops across Noida-NCR run these for side milling and finishing daily. Stocked at Sector 9, Noida; WhatsApp for price.

Request QuoteCall +91-9811104037

Available — pickup today from Sector 9, Noida

Same-day Delhi NCR dispatch · call to confirm stock on your exact model

Diameter Range: 1.00mm to 25.00mmNumber of Flutes: 4Helix Angle: 35°Coating: AlTiN (Aluminium Titanium Nitride)

Key Features

4-flute design for higher feed rates and superior surface finish
Available in Standard, Long, and Extra Long lengths for all reach requirements
35° helix angle for smooth cutting and reduced chatter
AlTiN coating for extended tool life in steel, stainless, and cast iron
DIN 6535HA plain shank with h10 tolerance for universal holder compatibility
Diameter range 1.00mm to 25.00mm, covers micro to large milling
Centre cutting capability for plunge and ramp entry
Micro-grain carbide substrate for consistent edge quality

Technical Specifications

Diameter Range1.00mm to 25.00mm
Number of Flutes4
Helix Angle35°
CoatingAlTiN (Aluminium Titanium Nitride)
StandardDIN 6535HA
Shank Toleranceh10
Length OptionsStandard, Long, Extra Long
SubstrateMicro-grain tungsten carbide
Centre CuttingYes

Applications

The 4 Flute End Mills is used across a wide range of industrial applications:

  • Side milling and profiling with high surface finish requirements
  • Finishing passes on CNC machining centres and VMCs
  • Deep pocket milling with Long and Extra Long variants
  • Shoulder milling and step cutting
  • High-efficiency roughing with increased feed rates
  • Contour milling of complex 2D profiles
  • Production milling in automotive and general engineering

Industries Served

Automotive manufacturingGeneral engineering and job shopsMould and die makingAerospace component productionMedical device manufacturingDefence and ordnance

Need 4 Flute End Mills? Get the Best Dealer Price

As your Miranda (Dormer Pramet) dealer, Shri Narayan Machinery LLP offers competitive pricing on the full 4 Flute End Mills range. Call us for availability and your best quote.

Request Quote on WhatsAppCall +91-9811104037

C-101, Sector 9, Noida, Uttar Pradesh 201301 | Miranda (Dormer Pramet) Dealer

Frequently Asked Questions: 4 Flute End Mills

Use Standard length for 90% of your work. It gives the best rigidity and tool life. Switch to Long length when you need to reach pockets deeper than 2xD or mill shoulders taller than Standard cutting length allows. Extra Long is only for deep cavities (4xD+) where no other option reaches. Every increase in overhang reduces rigidity and increases chatter risk, so always use the shortest end mill that reaches your feature.

Need This Product? Get a Quote Now.

Call or WhatsApp us with the model number. We'll check stock and give you the best price. Bulk orders welcome.

Call +91-9811104037WhatsApp Us
Call NowWhatsApp Quote