Miranda (Dormer Pramet) Products | Dealer in Noida
Miranda is India's established carbide cutting tools brand, now part of the global Dormer Pramet group (Sandvik). Miranda makes solid carbide drills, solid carbide end mills, tungsten carbide rotary burrs, carbide-tipped turning tools, centre drills, and reamers used across automotive, aerospace, die-mould, and general engineering. Known for consistent quality and competitive pricing, Miranda carbide tools are a staple in Indian machine shops, tool rooms, and CNC production floors. The Dormer Pramet acquisition brought global R&D, AlTiN coatings, and tighter manufacturing tolerances while keeping the pricing Indian machinists trust. Available at Shri Narayan Machinery LLP in Noida: solid carbide drills, end mills, rotary burrs, and brazed carbide turning tools.
Brand Info
Miranda (Dormer Pramet) Product Catalog
Browse our full range of Miranda (Dormer Pramet) products. Click any series for specs, pricing, and availability.
Solid Carbide Drills
Solid Carbide Jobber Drills
An HSS drill giving up after 50 holes is the usual reason shops switch: a Miranda solid carbide jobber drill runs 500+ holes at 2-3x the cutting speed, and hole quality holds from first to last. The DIN 338 range covers 1.00mm to 20.00mm in 0.10mm steps at 4xD depth, so odd sizes for reamed and tapped holes are all there. A 140° self-centering point cuts without walking, skipping the centre drill on flat faces, and the AlTiN coating survives 900°C edge temperatures for higher speeds. Micro-grain carbide with h6 shanks suits hydraulic and shrink-fit holders on VMCs. CNC job shops and auto component plants across Noida-NCR buy singles and full diameter sets. Stocked at Sector 9, Noida; WhatsApp diameters for price.
View Details & Specs
Solid Carbide Stub Drills
Shorter drill, straighter hole: Miranda DIN 1897 stub drills are 30-40% shorter than jobber drills, and that extra rigidity shows up as IT7-IT8 hole tolerances against IT9-IT10, with far fewer snapped drills below 3mm diameter. The rule is simple: hole shallower than 2.5xD, pick the stub. Sizes run 1.00mm to 20.00mm in 0.10mm increments with the same 140° self-centering point and AlTiN coating as the jobber series, on micro-grain carbide with h6 shanks. Thin plate, sheet metal, multi-spindle heads, and hardened material to HRC 45 are their home ground, and on a less rigid pillar drill the shorter length actually helps. Production shops across Noida-NCR stock both series side by side. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & SpecsSolid Carbide End Mills
2 Flute End Mills
Full-width slotting fills flutes fast, which is why the 2-flute end mill exists: bigger chip gullets that clear the slot instead of packing it. Miranda's solid carbide 2-flute range runs 0.50mm to 20.00mm on DIN 6535HA shanks (h10), with a 35° helix and 10° radial rake for clean chip formation in steel and aluminium, plus centre-cutting tips that plunge and ramp straight into solid stock. AlTiN coating takes the heat of buried-tool cuts; keep depth to about 1xD per pass in a full slot. For aluminium's long stringy chips, two flutes are the default choice anyway. Job shops and mould rooms across Noida-NCR buy these for keyways, pockets, and profiling. Stocked at Sector 9, Noida; WhatsApp sizes and quantity for price.
View Details & Specs
4 Flute End Mills
Four edges, double the feed: at the same RPM and chip load, a 4-flute end mill runs twice the table feed of a 2-flute, or the same feed with a finer finish. Miranda's 4-flute solid carbide range covers 1.00mm to 25.00mm in Standard, Long, and Extra Long lengths, so shoulders, deep pockets, and 4xD+ cavities all get a tool without extension holders. The 35° helix and AlTiN coating match the rest of the family, on DIN 6535HA h10 shanks with centre-cutting ends for ramp entry. Working rule: use the shortest length that reaches, and leave full-width slotting to the 2-flutes. Auto component plants and job shops across Noida-NCR run these for side milling and finishing daily. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Ball Nose End Mills
Mould cavities, die contours, freeform surfaces: Miranda ball nose end mills cover 3D work from 1.00mm to 20.00mm diameter in both 2-flute and 4-flute versions, Standard and Long lengths. The working split: rough with 2-flute for chip clearance in deep cavities, finish with 4-flute for surface quality, often in the same setup. Step-over decides your finish; at 3-5% of ball diameter, scallop height drops under a micron for near-mirror mould surfaces. AlTiN coating copes with the speed swing across the ball, from near zero at the tip to full speed at the periphery, and DIN 6535HA h10 shanks fit standard holders. Mould makers and die shops across Noida-NCR buy these as matched sets. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & SpecsPremium Maxx Pro End Mills
Standard end mills chip out above 45 HRC; the Miranda Premium Maxx Pro series is built for what comes after. Ultra-fine grain carbide, a nano-composite AlTiN-based coating, and variable helix flutes that break up chatter harmonics let you mill hardened D2, H13, SKD11, and P20 directly, up to 60 HRC, hitting Ra 0.2-0.4 micron finishes that skip EDM and polishing on many dies. Choose 4-flute flat or ball nose, on h6 shanks for the near-zero runout hard milling demands, and run light cuts on a rigid 10,000+ RPM machine. Die repair after heat treatment is where these earn their keep. Tool rooms and stamping die shops across Noida-NCR keep them for hard-milling work. Stocked at Sector 9, Noida; WhatsApp for price.
View Details & Specs
Buy Genuine Miranda (Dormer Pramet) Products in Noida
As a stocking dealer for Miranda (Dormer Pramet), Shri Narayan Machinery LLP stocks genuine products with full manufacturer warranty. Visit our shop at C-101, Sector 9, Noida or call +91-9811104037 for availability, pricing, and bulk-order discounts. We serve manufacturing units, factories, and workshops across Noida, Greater Noida, and Delhi NCR.
Need Miranda (Dormer Pramet) Products? Call for Best Dealer Price
Shri Narayan Machinery LLP is your Miranda (Dormer Pramet) dealer in Noida. Call us for availability, best pricing, and bulk-order discounts.