People ring up asking for the SPAC price list, so here it is, the way we actually sell it from Sector 9: our dealer from-prices, which are 30% off SPAC's MRP because we're the authorized dealer, ex-GST, for all 35 SPAC series and 4,973 priced models. Tie-rod ISO cylinders start at ₹974, solenoid valves at ₹357, FRL units at ₹396, push-in fittings at ₹14. The numbers come straight off the current SPAC list against our own catalogue, not off some marketplace. Send your exact model on WhatsApp and you'll get the exact price back, usually within a few minutes if the shop's open.
Before you read the numbers
Three things. We're SPAC's authorized dealer, so every price here is MRP minus 30%. That's the standard rate; if you're buying quantity or you're a regular account, tell me and it'll be better than this. Everything is ex-GST and single piece. And "from ₹X" means the cheapest model in that series, usually the shortest stroke or the smallest bore, so it tells you the tier, not your exact part. A Ø63 × 400 with a magnet costs more than the Ø63 × 25 in the table, and I've put the stroke ladder further down so you can see how much more.
Also, about bait rows. Raw price lists often start with things that aren't the product at all, a coil cover at the top of the process-valve list, a spare spring in a cylinder list. I've taken those out. When this page says a process valve starts at ₹676, that's a valve, not a plastic cover.
Cylinders
This is what SPAC is known for and what we sell most of: 12 series, 3,810 models. Cheapest model in each series:
| Series | Type | Models | From (ex-GST) |
|---|---|---|---|
| ESC | Tie-rod, ISO 15552 footprint | 672 | ₹974 Ø32 × 25 |
| ESNC | ISO 15552 tie-rod, Ø32 to Ø250 | 912 | ₹1,044 Ø32 × 25 |
| SDNC | ISO 15552 profile body | 672 | ₹1,161 Ø32 × 25 |
| SDNU | ISO 6432 round-body mini | 72 | ₹713 Ø12 × 25 |
| EMAL | Compact, aluminium | 104 | ₹680 Ø20 × 25 |
| SQ2 | Short-stroke compact | 260 | ₹706 Ø20 × 5 |
| SDSU | Compact | 576 | ₹1,103 Ø32 × 25 |
| SDVU | Short-stroke compact | 240 | ₹1,154 Ø16 × 10 |
| SX | Double-shaft | 30 | ₹3,375 Ø15 × 10 |
| SRC | Rotary, rack and pinion | 24 | ₹3,472 Ø20 |
| P2GP | Tri-rod guided | 32 | ₹4,556 Ø25 × 25 |
| ESNS | Stainless-steel barrel | 216 | Price on request |
ESC and ESNC by bore
These two are the ISO 15552 tie-rods that go on most Noida lines. ESC is the value one; ESNC is the full range up to Ø250. Mostly the ESC is a bit cheaper, except at Ø80 where the ESNC is actually the lower price, which is why when you ask me for a Ø80 I quote ESNC-80x25.
| Bore × 25mm | ESC from | ESNC from |
|---|---|---|
| Ø32 | ₹974 | ₹1,044 |
| Ø40 | ₹1,074 | ₹1,126 |
| Ø50 | ₹1,166 | ₹1,381 |
| Ø63 | ₹1,496 | ₹1,657 |
| Ø80 | ₹2,302 | ₹2,276 |
| Ø100 | ₹2,711 | ₹2,969 |
| Ø125 | ₹4,425 | ₹5,381 |
Stroke is the other thing that moves the price, and it's pretty linear. On the ESNC Ø63: 25mm is ₹1,657, 50mm ₹1,798, 100mm ₹2,073, 200mm ₹2,496, 400mm ₹3,316, and the full 1000mm stroke is ₹5,676. Call it four rupees a millimetre at that bore, which is handy for budgeting a custom length before you ring me. A double-ended rod (ESNC-2S) at Ø50 × 100 is ₹2,433 against ₹1,622 for the plain one.
Minis and compacts
The SDNU ISO 6432 minis go by bore: Ø12 is ₹713, Ø16 ₹816, Ø20 ₹926, Ø25 ₹992, all magnetic (-S) at 25mm stroke, then Ø32 at ₹2,122 and Ø40 at ₹2,697. On compacts, the EMAL starts at ₹680 (Ø20 × 25), the SQ2 short-stroke at ₹706 (Ø20 × 5), an SQ2 Ø32 × 25 is ₹1,020 and the heavier SDSU Ø32 × 25 is ₹1,103.
Valves
SPAC's valve list is short, only four series, but the everyday items are there and the prices are good:
- Solenoid valves, 110 models: 3/2 single solenoid 1/8" from ₹357 (TG23-06E), 2/2 direct-acting NC 1/4" ₹403, 3/2 single solenoid NC 1/4" ₹495, 5/2 single solenoid 1/4" ₹589 (PS20E1S-02), 5/2 hand lever with detent ₹564, 5/2 single air pilot ₹613, 5/3 centre-closed hand lever ₹839
- Mechanical and hand valves, 64 models: speed-control valves from ₹246 (1/8"), OR-gate valves from ₹251, non-return valves from ₹344 (1/4")
- Process valves, 36 models: 2/2 direct-acting 1/4" from ₹676 (UD-08), 3/8" ₹1,262; coils and coil covers are separate line items from ₹188
- Valve spares: spool-with-seal kits for the P-series valves from ₹152, replacement coils from ₹183
FRL and air prep
Single units in the 2000 (1/4") and 3000 (3/8") sizes start at ₹396 for a 1/4" precision regulator (AF2000-02), ₹438 for a 1/4" lubricator (AL2000-02), ₹442 for a 1/4" filter (AF2000-02U) and ₹545 for the AR2000-02 regulator. Go up to 3/8" and it's ₹528 for a lubricator, ₹582 for a filter, ₹674 for a precision regulator. Half-inch filters and lubricators are ₹717 and ₹737. Full combination units go up to ₹5,426 for the 1" AC5000-10. All 40 models with sizes are on the FRL page. The spares are cheap enough to keep a few in a drawer: regulator caps from ₹63, bowls and cartridges on the FRL spares list.
Fittings and tube
Fittings are where a price list actually matters, because you buy them by the hundred. E-series push-in fittings: a 6mm × 1/8" straight (EPC601) is ₹32, the elbow (EPL601) ₹34, an 8mm × 1/8" straight ₹34, and a 6mm plug is ₹14. The A-series starts at ₹16, mini fittings at ₹36, and the SAP stainless range at ₹78 for washdown lines.
PU tube is per 100m roll: 4 × 2.5mm ₹974, 6 × 4mm ₹1,463, and the colours go up to 12 × 8mm at ₹6,418. Nylon EA tube from ₹870 per 100m, PU recoil hose from ₹89, and a tube cutter is ₹179. Silencers start at ₹20 for an M5, blow guns at ₹185.
Seal kits and the other bits
The seal kits are the reason a tie-rod cylinder is worth resealing instead of throwing away. From the 90-part-number list:
| ESNC seal kit | Price (ex-GST) | New ESNC × 25, for comparison |
|---|---|---|
| Ø32 | ₹534 | ₹1,044 |
| Ø40 | ₹628 | ₹1,126 |
| Ø50 | ₹813 | ₹1,381 |
| Ø63 | ₹902 | ₹1,657 |
| Ø80 | ₹1,010 | ₹2,276 |
| Ø100 | ₹1,082 | ₹2,969 |
| Ø125 | ₹2,654 | ₹5,381 |
Other bits: rod forks, clevises and brackets from ₹139, a sensor clamp ₹205 and the magnetic switch itself with a 2m lead ₹568, hydraulic shock absorbers from ₹1,658, rotary actuator spares from ₹1,288. If you'd rather just hand us the cylinder, Sanjay reseals a ⌀40 for ₹900-1,500 and rebuilds a ⌀160 for ₹6,000-10,000, and it's back with you in 24-72 hours. The repair page has the full table.
Getting your actual price
Everything above is the tier. Your part number sets the actual rate, and that's one WhatsApp message. Send the SPAC code if you have it, ESNC-S-63x200 or whatever it is, or bore × stroke, magnet or not, and how many. If all you know is the load and the air pressure, send that and we'll size it with the force calculator before we quote. Replies go out the same day the shop's open, from Sector 9, Noida, and everything goes on a GST invoice.
A few more things. SPAC is made here in Noida, Shree Prayag Air Controls Pvt. Ltd. in Sector 57, so if I don't have your size on the shelf it's a matter of days, not weeks. If your size isn't in any list at all, a special stroke or mounting or rod end, send the drawing and we'll have it made at the factory and delivered within five days, tops, quoted on the spec. I'll say it plainly because I've checked: nobody else in India is giving that commitment on a custom cylinder right now. And when SPAC changes its MRP list we update this page and the catalogue together, so what you read here and what's on the series pages will match. If you want to see how SPAC sits against Festo, Janatics and Techno on price, that's in our four-brand price guide. Otherwise send the requirement across on WhatsApp, +91-9811104037, and let's get it priced.